Rigid

Type:

Aluminium systems

Exhaust system:

Rigid

Boiler:

Turbo boiler

Aluminium system AL1 consists of rigid pipes, blocks and accessories - coated or uncoated.
System AL1 is available in DN 80 - 10 mm.
It is designated primarily for interior and as liners in straight chimney flues.
Individual pieces of system AL1 is connected by socket connectors with EPDM seal.
Features according to ČSN EN 1856-1,2:
T200 P1 W Vm L13 100/150 O50

Tabs

Description

This system serves to drain combustion gases from turbo boilers with the highest temperature of combustion gases on the socket of the flue 200°C. It is primarily designated for pressure combustion gas routes. It is designated for combustion gas routes where the burning of ashes can occur. It is suitable for chimneys that are planned to be operated in wet operating mode.

Files

prohlasenioshodeal.pdf

Type:

Exhaust system:

Boiler:

The STARR system consists of rigid PPH pipes, molded parts and accessories. Made of PPH.
The STARR system is available in Ø60-315mm.
Especially suitable for interiors and for equipping straight risers in chimney flues.
The components of the STARR system are connected by sleeves with EPDM seals.
Features according to EN 14471:
T120 H1/P1 W2 O20 LI E U

Tabs

Description

This system enables complete evacuation of gases and fumes resulting from condensing and low-temperature boilers with maximum flue gas temperature at the boiler of 120°C. It is primarily intended for use in overpressure mode, but can also be used in under pressure operation. It can also be used for natural draft chimneys. The system is not intended for flue gas lines where ash combustion can occur, it is not resistant to soot fire. It is intended for use in wet operating mode, and usable only for heating systems, where gaseous fuels such as natural gas (L, H) and liquid fuels (LTO with sulfur content ≤0.2% or kerosene) are burned.

Gallery

Files

malymontazninavodalmeva.pdf

prohlasenioshodeeasy.pdf

kominovystitekeasy.pdf

Search form

Rigid

Tabs

Tabs